start > Netscreen > Useful Commands

Useful Commands

Created by dave. Last edited by dave, one year and 352 days ago. Viewed 455 times. #2

[diff] [history] [edit] [rdf]

labels

attachments

CPU info

> get perf cpu detail Average System Utilization: 1% Last 60 seconds: 59: 2 58: 2 57: 2 56: 2 55: 2 54: 2 53: 2 52: 2 51: 2 50: 2 49: 2 48: 2 47: 2 46: 2 45: 2 44: 2 43: 2 42: 2 41: 2 40: 2 39: 2 38: 2 37: 2 36: 2 35: 2 34: 2 33: 2 32: 2 31: 2 30: 2 29: 2 28: 2 27: 2 26: 2 25: 2 24: 2 23: 2 22: 2 21: 2 20: 2 19: 2 18: 2 17: 2 16: 2 15: 2 14: 2 13: 2 12: 2 11: 2 10: 2 9: 2 8: 2 7: 2 6: 2 5: 2 4: 2 3: 2 2: 2 1: 2 0: 2

Last 60 minutes: 59: 2 58: 1 57: 2 56: 2 55: N/A 54: N/A 53: N/A 52: N/A 51: N/A 50: N/A 49: N/A 48: N/A 47: N/A 46: N/A 45: N/A 44: N/A 43: N/A 42: N/A 41: N/A 40: N/A 39: N/A 38: N/A 37: N/A 36: N/A 35: N/A 34: N/A 33: N/A 32: N/A 31: N/A 30: N/A 29: N/A 28: N/A 27: N/A 26: N/A 25: N/A 24: N/A 23: N/A 22: N/A 21: N/A 20: N/A 19: N/A 18: N/A 17: N/A 16: N/A 15: N/A 14: N/A 13: N/A 12: N/A 11: N/A 10: N/A 9: N/A 8: N/A 7: N/A 6: N/A 5: N/A 4: N/A 3: N/A 2: N/A 1: N/A 0: 2

Last 24 hours: 23: N/A 22: N/A 21: N/A 20: N/A 19: N/A 18: N/A 17: N/A 16: N/A 15: N/A 14: N/A 13: N/A 12: N/A 11: N/A 10: N/A 9: N/A 8: N/A 7: N/A 6: N/A 5: N/A 4: N/A 3: N/A 2: N/A 1: N/A 0: N/A

Session thrash/ramp-up rate

> get perf session detail Last 60 seconds: 0: 2 1: 2 2: 3 3: 7 4: 8 5: 7 6: 7 7: 2 8: 4 9: 2 10: 3 11: 9 12: 6 13: 14 14: 12 15: 5 16: 18 17: 6 18: 5 19: 6 20: 2 21: 74 22: 3 23: 8 24: 5 25: 4 26: 4 27: 2 28: 12 29: 5 30: 6 31: 5 32: 3 33: 35 34: 3 35: 5 36: 5 37: 3 38: 3 39: 5 40: 2 41: 3 42: 2 43: 6 44: 3 45: 2 46: 11 47: 4 48: 2 49: 4 50: 2 51: 2 52: 3 53: 13 54: 57 55: 10 56: 9 57: 6 58: 3 59: 5

Last 60 minutes: 0: 218 1: 475 2: 403 3: 412 4: 832 5: 439 6: 568 7: 1076 8: 0 9: 0 10: 0 11: 0 12: 0 13: 0 14: 0 15: 0 16: 0 17: 0 18: 0 19: 0 20: 0 21: 0 22: 0 23: 0 24: 0 25: 0 26: 0 27: 0 28: 0 29: 0 30: 0 31: 0 32: 0 33: 0 34: 0 35: 0 36: 0 37: 0 38: 0 39: 0 40: 0 41: 0 42: 0 43: 0 44: 0 45: 0 46: 0 47: 0 48: 0 49: 0 50: 0 51: 0 52: 0 53: 0 54: 0 55: 0 56: 0 57: 0 58: 0 59: 0

Last 24 hours: 0: 4423 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 7: 0 8: 0 9: 0 10: 0 11: 0 12: 0 13: 0 14: 0 15: 0 16: 0 17: 0 18: 0 19: 0 20: 0 21: 0 22: 0 23: 0

Showing VPN SA status

(VPN Security Association Status)

ns5gt-> get sa
total configured sa: 2
HEX ID    Gateway         Port Algorithm     SPI      Life:sec kb Sta   PID vsys
00000002<    aa.bbb.cc.dd  500 esp:3des/sha1 2129eede  3434 unlim A/-     3 0
00000002>    aa.bbb.cc.dd  500 esp:3des/sha1 d65705f3  3434 unlim A/-     2 0
00000003<    aa.bbb.cc.dd  500 esp:3des/sha1 00000000 expir unlim I/I     5 0
00000003>    aa.bbb.cc.dd  500 esp:3des/sha1 00000000 expir unlim I/I     4 0

Each policy has its own SA. So a bidirectional VPN policy, which is really two policies glued together, has two SAs, one for each direction.

In the example above, aa.bbb.cc.dd is the IP address of the remote gateway.

The Status has two characters. The first is the status of the SA, the second is whether or not VPN Monitoring is enabled on the SA. In the example above, one of the SA pairs is up with no monitoring enabled (indicated with A/-) and the other is not (indicated with I/I).

no comments | post comment

see also:
Netscreen	kickstart	Multi-port VIP	Backup
VPN Tunnel I...	Juniper	DNS Hijacking	Hyper...
RedHat/kickstart	VLAN	Why is the file...	snipsnap-index
route	Cobbler	snipsnap-search	Restrict Acces...
Concurrent ...	dave	NFS File Crea...	iLO Administrato...

Useful Commands

CPU info

Session thrash/ramp-up rate

Showing VPN SA status

Virtual Dave Megaplex:

Useful: