start > APC > Useful OID Values
Useful OID Values
Get:
| OID | Name | Description |
|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.2.2.1 | upsAdvBatteryCapacity | The remaining battery capacity expressed in percent of full capacity. |
| 1.3.6.1.4.1.318.1.1.1.2.2.3 | upsAdvBatteryRunTimeRemaining | The UPS battery run time remaining before battery exhaustion. |
| 1.3.6.1.4.1.318.1.1.1.4.2.3 | upsAdvOutputLoad | The current UPS load expressed in percent of rated capacity. |
| 1.3.6.1.4.1.318.1.1.1.4.2.4 | upsAdvOutputCurrent | The current in amperes drawn by the load on the UPS. |
Set:
| OID | Name | Description |
|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.6.2.1 | upsAdvControlUpsOff | Setting this variable to turnUpsOff(2) causes the UPS to shut off. When in this state, the UPS will not provide output power regardless of the input line state. Setting this variable to turnUpsOffGracefully(3) causes the UPS to shut off after a delay period. This allows the host to shut down in a graceful manner. When in this state, the UPS will not provide output power regardless of the input line state. If this UPS is an active member of a Synchronized Control Group (SCG) the turnUpsSyncGroupOff(4) command will perform a Synchronized Turn Off of all active Group members regardless of their current AC output status. If this UPS is an active member of a Synchronized Control Group (SCG) the turnUpsSyncGroupOffAfterDelay(5) command will perform a Synchronized Turn Off After Delay of all active Group members regardless of their current AC output status. This unit's Shutdown Delay will be used to execute the Turn Off After Delay command. If this UPS is an active member of an SCG, the turnUpsSyncGroupOffGracefully(6) command will perform a Synchronized Turn Off Gracefully of all active Group members regardless of their current AC output status. This unit's Maximum Shutdown Time and Shutdown Delay will be used to execute the Turn Off Gracefully command. Setting this value to noTurnUpsOff(1) has no effect. The value noTurnUpsOff(1) will always be returned when the variable is read. |
no comments |
post comment
Virtual Dave Megaplex:
Home Page- This wiki's start page
- Send Feedback To Dave
Logged in Users: (0)
Recently Changed
Check Internet Service Database Match- Device-Local Certificate Expired
- CLI Policy Lookup
- DH Selection For IPsec VPNs
- Scan For Newly Added Disk
- nmap
- Seconds Since Epoch to Local Time
- Link Monitor
- DH group to OAKLEY_GROUP table
- Fire Eater
- start
- FortiClient Error Codes
- dhparams Generation
- SSL Certificate Bundles
- ufw
- Grow A LVM Partition
- Creating Users
- whoami
- list databases
- 2023
- 2022
- 2019
- 2018
- 2017
- 2011
- 2010
- 2008
- 2001
- 2000
- 1999
Editing: snipsnap-help, Image Macro(Et auditum est, et idcirco ego nunc simulare)
This is a collection of techical information, much of it learned the hard way. Consider it a lab book or a /info directory. I doubt much of it will be of use to anyone else.