For When You Can't Have The Real Thing
[ start | index | login ]
start > Juniper > SRX320 > TFTP Install Firmware From Loader

TFTP Install Firmware From Loader

Created by dave. Last edited by dave, 93 days ago. Viewed 189 times. #1
[edit] [rdf]
labels
attachments
(2017-08-22)

TFTP Installing Firmware From The Loader

  • connect a console
  • reboot the device
  • interrupt the boot process when it says
    Press SPACE to abort autoboot
  • set U-boot environment (note that the gatewayip may not be necessary if you are on the same subnet as your tftp server)
=> setenv ipaddr 10.157.70.170
=> setenv netmask 255.255.255.0
=> setenv gatewayip 10.157.64.1
=> setenv serverip 10.157.60.1
=> saveenv
=> reset
  • the firewall reboots
  • let the boot pass through the autoboot prompt as above
  • interrupt the boot with the space bar when you see
    Hit [Enter] to boot immediately, or space bar for command prompt.
  • issue the install command at the loader prompt:
  • the firewall will boot the new kernel, format the partitions, then install the firmware. On a SRX320 this took in excess of 20 minutes to run.
  • the firewall will reboot into Amnesiac state.
no comments | post comment

Virtual Dave Megaplex:

Internet Explorer 6 Users >>Click Here

(read this note about local search)

Logged in Users: (0)
… and 19 Guests.


Editing: snipsnap-help, Image Macro

(Et auditum est, et idcirco ego nunc simulare)

Installed 6 years and 314 days ago
Powered By >>SnipSnap Version 1.0b1-uttoxeter

This is a collection of techical information, much of it learned the hard way. Consider it a lab book or a /info directory. I doubt much of it will be of use to anyone else.

Useful:


snipsnap.org | Copyright 2000-2002 Matthias L. Jugel and Stephan J. Schmidt