Recently Updated Pages
Loading A Configuration From The Terminal
(2017-08-22) Loading Configuration From The Terminal To replace the current configuration with a ...
VPN Phase 1 Connects Then Drops
(2015-03-26) Problem Phase 1 connects then drops seconds later. In the trace options, you see the...
VIP
(2 April 2012) Problem I want to create a ScreenOS-type VIP (aka a port forward) where one port o...
Getting Policies In The Order You Want Them
You can do this through the CLI: insert security policies from-zone trust to-zone untrust policy ...
IKE Identity Failure
(2015-03-26) Problem Phase 1 connects then drops seconds later. In the trace options, you see the...
fxp0 Addressing
(17 January 2012) Incomplete, work in progress. I probably don't understand this fully yet. When ...
Cluster Failover
(17 January 2012) TL/DR: different parts of the cluster can be on different nodes. It doesn't loo...
List DHCP Address
(2015-02-11) Problem My SRX has been assigned an IP address and I don't know what it is. I have a...
Application Timeout Values
(2013 March 7) Application Timeout Values To check: root@sentry> request pfe execute target fwdd ...
VPN Detailed Logs
(2014-08-19) Detailed logging about VPN traffic: set security ike traceoptions flag all set secur...
VPN Associations
(2014-08-21) List phase 1 associations: > show security ike security-associations List phase 2 a...
VPNs
(10 February 2012) Background: I'm a Netscreen ScreenOS administrator and I'm coming to grips wit...
SRX240 Clustering
Just following the cook book at Juniper KB15504 is incomplete in some key areas. The main problem...
CIFS
(23 March 2012) Define CIFS for JunOS 10 edit applications application CIFS set term CIFS-1 proto...
Source Interface NAT
(2015-03-10) If traffic is going from trust to the vpn zone, and that traffic matches the rule su...
System Alarm autorecovery information needs to be saved
(2017-08-05) Problem System alarm: autorecovery information needs to be saved Solution root@gatew...
snmp on SRX
(2013-07-24) To enable basic snmp on an SRX: set snmp description Firewall set snmp location "Loc...
PXE Boot Server
(2014-02-12) Problem Send PXE boot options from a SRX DHCP server. Solution set system services d...
Multiple Networks on Trust Interface
(2013 March 7) If you have an interface defined with two IP addresses on it: vlan { unit...
Rancid in display set mode
(31 January 2013) Problem I think in set commands, not the fancy braces that JunOS likes to displ...