Skip to main content

v5.0.x


arp

(2015-04-20) Show the arp table: # get system arp

Backup ISP with some traffic selection

(2013-08-26) Problem: My scenario is that I have a FortiGate 60D with two ISPs: a static DSL, and...

crashlog

(2015-04-22) List the firewall's internal crashlog: # di de crashlog read

DHCP and PPPoE

Problem:        Cannot set mode to DHCP or PPPoE when HA is on. It doesn't work. Note: this is ...

DHCP Client Leases

(2015-04-22) List the DHCP leases handed out on $INTERFACE. # exec dhcp lease-list $INTERFACE

DHCP Reservation

(2015-01-29) Warning: this method does not work in 5.2 (and presumably higher). config system dhc...

HA Cluster Member Firmware Revisions

(2014-11-20) Verify the firmware versions of cluster members:         fw-ottawa-A # get syste...

Interface Duplex

(2013-12-17) Problem Need to force speed/duplex on a physical interface. Solution There's no GUI ...

Interface Mode

(2014-06-24) To set interface mode: make sure the default Internal interface has no DHCP server ...

Interface Status

(2015-04-01) Interface State Show IP, status, speed/duplex: get system interface physical Show p...

Memory Logging

(2015-03-12) Problem By default, baby firewalls (which seems to mean up to and including F90Ds ) ...

Packet Capture

(2013-07-18) Show information of packets seen on an interface: # diag sniffer packet internal non...

Radius Server Definition

(2014-06-14) On the smaller FortiGates, the GUI doesn't include the ability to define Radius serv...

Reset Admin Password

(2014-07-03) Problem Nobody remembers the password for a given admin account. We have another sup...

Reset to Factory Defaults

(2013-08-28) Reset To Factory Defaults You have two minutes from power reset to perform this task...

Routing Table

(2013-08-26) Display the routing table: # get router info routing-table all

Simple Commands

(2013-11-13) Ping # exec ping $TARGET Routes # get router info routing-table all

Syslog

(2014-08-22) To enable logging to a syslog server: config log syslogd setting set status enab...

Test Authentication Servers

Testing authentication These cli commands can help you test your radius or ldap server: # diag te...